Publication: Inovar Auto: Evaluating Brazil's Automative Industrial Policy to Meet the Challenges of Global Value Chains
Loading...
Published
2017-11
ISSN
Date
2017-12-05
Editor(s)
Abstract
Brazil's automotive industry is unwell. Productivity and trade performance are low, consumer prices are high, local companies are bit players both at home and abroad, and innovation is almost nonexistent. The cumulative (opportunity) costs of Brazil's protectionist automotive policies, which have been in place in some form since the 1950s – while immeasurable – are certainly very high. However, it is not accurate to say that they have failed, since Brazil would probably not have an automotive industry today without them, at least not one that employs nearly 500,000 workers in the manufacturing sector. According to the most recent figures, 89 percent of vehicles sold in Brazil were produced in the country, and very recently, exports have surged to 30 percent of production. However, Brazil has a large trade deficit in automotive parts and components and finished vehicle exports are volatile, used mainly as a 'pressure relief valve' during downturns in the domestic market. Local content figures are not available, signaling a major flaw in the accountability and transparency of Brazil’s automotive industrial policy regime.
Link to Data Set
Citation
“Sturgeon, Timothy; Lima Chagas, Leonardo; Barnes, Justin. 2017. Inovar Auto: Evaluating Brazil's Automative Industrial Policy to Meet the Challenges of Global Value Chains. © World Bank. http://hdl.handle.net/10986/28947 License: CC BY 3.0 IGO.”
Digital Object Identifier
Associated URLs
Associated content
Other publications in this report series
Journal
Journal Volume
Journal Issue
Collections
Related items
Showing items related by metadata.
Publication SACU in Global Value Chains(World Bank, Washington, DC, 2016-01)Once concentrated among a few large economies, global flows of goods, services, and capital now reach an ever larger number of economies worldwide. Global trade in goods and services increased 10 times between 1980 and 2011, while FDI flows increased almost 30-fold. The sales from foreign-owned firms amount to $26 trillion. As many as 3,000 bilateral investment treaties have been signed to create the framework of deep agreements needed not only to facilitate the global movement of final goods and services but also to internationalize entire processes of production. All these flows have grown over time, creating increasingly dense and complex networks. This note is intended provide an overview of SACU countries’ participation and performance in GVCs, drawing on several data sources and indicators, and most importantly the recently released 189-country Eora multi-region-input-output (MRIO) database (Lenzen et al. 2012, 2013). Following this introduction, the note is structured in five additional sections. Section two discusses in greater detail the scope of the report, including the data sources and methodological approaches, as well as their respective limitations. Section three looks at structural integration in trade, including the degree to which SACU countries import and export intermediates. Section four analyzes trends in value-added exports as a first step in exploring GVC participation. Section five hones in on the core measures of GVC participation and a brief analysis of SACU countries’ position in GVCs. Finally, section six concludes by bringing together the main findings from the analysis.Publication Global Value Chains in the Electronics Industry : Was the Crisis a Window of Opportunity for Developing Countries?(2010-09-01)This paper presents evidence of the importance of electronics global value chains (GVCs) in the global economy, and discusses the effects of the recent economic crisis on the industry. The analysis focuses on how information is exchanged and introduces the concept of "value chain modularity." The authors identify three key firm level actors -- lead firms, contract manufacturers, and platform leaders -- and discuss their development, or "co-evolution" in the context of global integration. Company, cluster, and country case studies are then presented to illustrate how supplier capabilities in various places have developed in the context of electronics global value chains. The findings identify some of the persistent limits to upgrading experienced by even the most successful firms in the developing world. Four models used by developing country firms to overcome these limitations are presented: (1) global expansion though acquisition of declining brands (emerging multinationals); (2) separation of branded product divisions from contract manufacturing (original design manufacturing (ODM) spinoffs); (3) successful mixing of contract manufacturing and branded products (platform brands) for contractors with customers not in the electronic hardware business; and (4) the founding of factory-less product firms that rely on global value chains for a range of inputs, including production (emerging factory-less start-ups).Publication Leading Dragons Phenomenon : New Opportunities for Catch-Up in Low-Income Countries(2012-03-01)Modern economic development is accompanied by the structural transformation from an agrarian to an industrial economy and occurs through a process of continuous industrial and technological upgrading. Since the 18th century, all countries that industrialized successfully in Europe, North America and East Asia followed their comparative advantage and leveraged the late-comer advantage to emulate the leader-follower flying geese pattern of industrial upgrading. The large dynamic emerging market countries such as China, India and Brazil are also engaged in industrial upgrading but with a critical difference. In particular, because of its sheer size, China has absorbed nearly all labor-intensive jobs and become the world s largest exporter of labor-intensive products. The current view is that China s dominance hinders poor countries from developing similar industries. The authors argue that industrial upgrading has increased wages and is causing China to graduate from labor-intensive to more capital- and technology-intensive industries. These industries will shed labor and create a huge opportunity for lower wage countries to start a phase of labor-intensive industrialization. This process, called the Leading Dragon Phenomenon, offers an unprecedented opportunity to low-income Sub-Saharan Africa where the industrial sector is underdeveloped and investment capital and entrepreneurial skills are leading constraints to manufacturing. It can seize the opportunity and resolve the constraints by attracting some of the OFDI flowing currently from China, India and Brazil into the manufacturing sectors of other developing countries. All low-income countries will compete but to catch the jobs spillover from China, the winner must implement credible economic development strategies that are consistent with its comparative advantage.Publication The Impact of Export Tax Incentives on Export Performance : Evidence from the Automotive Sector in South Africa(2011-03-01)The original goal of the Motor Industry Development Program was to help the automotive industry in South Africa adjust to trade liberalization and become internationally competitive. In simple terms, it consists of an import/export complementation arrangement, whereby the local value-added of components or built-up vehicles exported earns credits that can be used to rebate import duties on components and vehicles. This study provides a first attempt at a quantitative analysis of the Motor Industry Development Program using the difference-in-difference methodology, in order to assess to what extent the program was effective in improving South Africa's automotive export performance during 1996-2006. The authors take a two-tier approach. First, they perform a comparative study using different manufacturing sectors within South Africa; second, they apply this methodology to analyze South Africa and a number of comparator countries that are automotive producers and exporters. The analysis finds that the impact of the program on automotive exports in South Africa is positive and significant. In particular, (i) the largest response to the program in terms of improved manufacturing exports occurs with a delay after the adoption of the law, suggesting that exports need time to fully react to the incentives; and (ii) in turn, the effectiveness of the tax incentives fades in time, reaffirming the common belief that tax incentives may affect some business decisions particularly in the short run, but they are not a primary consideration for investors in the long run.Publication Building Competitive Green Industries : The Climate and Clean Technology Opportunity for Developing Countries(Washington, DC, 2014-10)Climate change will have its largest impacts on developing countries, with poor populations particularly hard hit and unable to adequately adapt. There is an opportunity for developing countries to pursue a complementary approach, emphasizing building up the capabilities of local firms to participate in the business opportunities surrounding climate change. Climate change therefore represents an opportunity for developing countries to build local green industries that can drive sustainable economic growth and provide environmental benefits. This report offers insight to policy makers and other stakeholders seeking to develop competitive green industries in developing countries. It provides an overview and estimate of the market opportunity for climate and clean technology business in developing countries over the coming decade. It identifies which aspects of these markets are most accessible to local firms and to small and medium enterprises (SMEs) in particular. Using a newly gathered set of firm data, it identifies which parts of the value chain are already being targeted by local industry. Finally, it provides a set of actions that can be considered for countries that intend to build up local green industries.
Users also downloaded
Showing related downloaded files
Publication Estimating Real Production and Expenditures across Nations : A Proposal for Improving the Penn World Tables(World Bank, Washington, DC, 2007-03)From its inception, the Penn World Tables (PWT), building on the International Comparisons Program (ICP) of the United Nations, has sought to compare the standard of living of individuals in different countries. That is, the term "real GDP per capita" as reported in the PWT is intended to represent the ability to purchase goods and services by a representative agent in the economy. The same is true of benchmark comparisons as published by the United Nations, Eurostat, or OECD. But this expenditure-side interpretation of real GDP is quite different from the uses to which benchmark ICP and PWT data are frequently applied, such as in growth regressions, where "real GDP" is intended to reflect the production side of the economy. In this paper the authors propose a new approach to international comparisons of real GDP measured from the output side. They modify the traditional Gary-Khamis system, which measures real GDP from the expenditure side using real domestic expenditure, to include differences in the terms of trade between countries. The analysis shows that this system has a strictly positive solution under mild assumptions. On the basis of a set of domestic final output, import, and export prices and values for 151 countries in 1996, differences between real GDP measured from the expenditure and output side can be substantial, especially for small open economies.Publication Purchasing Power Parities and the Size of World Economies(Washington, DC: World Bank, 2020-05-19)The International Comparison Program (ICP) is a worldwide statistical initiative led by the World Bank under the auspices of the United Nations Statistical Commission. It produces comparable price and volume measures of gross domestic product (GDP) and its expenditure aggregates across economies. Through a partnership with international, regional, sub-regional and national agencies, the ICP collects price data and GDP expenditures to estimate purchasing power parities (PPPs) for the world’s economies. The report provides ICP results for the benchmark year 2017 and revised results for earlier years. ICP data are used for socio-economic analyses by researchers, academics, policy makers at the national and international levels, and by organizations such as the European Union, the International Monetary Fund, the Organization for Economic Co-operation and Development, the United Nations, and the World Bank. Notably, PPPs and ICP data are used in indicators monitoring progress towards eight goals of the United Nations’ 2030 Agenda for Sustainable Development, the World Bank’s international poverty lines, and the construction of the Human Development Index by the United Nations, among others. The use of PPPs continues to grow and the ICP website (icp.worldbank.org) lists many applications of the data by the development community, academia, media and others.Publication Effects of the Crisis on the Automotive Industry in Developing Countries : A Global Value Chain Perspective(2010-06-01)This paper applies global value chain analysis to study recent trends in the global automotive industry. The authors pay special attention to the effects of the recent economic crisis on the industry in developing countries. The principal finding is that the crisis has accelerated pre-crisis trends toward greater importance of the industry in the South. More rapid growth of car ownership is the impetus, but the co-location and close interaction of suppliers and lead firms in this industry is an important catalyst. Opportunities to move up in the value chain for suppliers in emerging economies have proliferated and are likely to become even stronger now that an increasing number of new models are developed specifically for markets in developing countries. The co-location of assembly and parts plants in national and regional production systems has largely confined the impact of sales declines during the crisis to each country/region. In addition, the different development strategies followed by countries like Mexico, China, and India are slowly converging as their industries gain size and independence.Publication Purchasing Power Parities and Real Expenditures of World Economics : A Comprehensive Report of the 2011 International Comparison Program(Washington, DC, 2015)The International Comparison Program (ICP) is a large and highly complex worldwide statistical program conducted under the charter of the United Nations Statistical Commission (UNSC). The ICP is designed to provide globally comparable economic aggregates in national accounts that can be used by individual researchers, analysts, and policy makers at the national and international levels and by international organizations such as the European Union, International Monetary Fund, Organization for Economic Co-operation and Development (OECD), United Nations, and World Bank. Over its lifetime, the ICP has become the principal source of data on the purchasing power parities (PPPs) of currencies, measures of real per capita income, and measures of real gross domestic product (GDP) and its main components from the expenditure side, including private consumption, government expenditures, and gross fixed capital formation. Indeed, since its inception in 1970, successive rounds of the ICP have produced valuable data for international economic analyses of economic growth and the catch-up and convergence of incomes among nations; productivity levels and trends; analyses of systematic patterns in national price levels and trends; construction of the Human Development Index by the United Nations; measures of regional and global inequality in incomes and consumption; and estimates of the incidence of absolute poverty using World Bank developed yardsticks such as the US$1 a day and $2 a day poverty lines.Publication Female Enrollment in Male-Dominated Vocational Training Courses(World Bank, Washington, DC, 2017)Occupational gender segregation is a worldwide phenomenon that is frequently cited as one of the contributing factors to the gender gap in earnings. Research by the World Bank’s Africa gender innovation lab (GIL) in Uganda and Ethiopia, studied the factors associated with women entrepreneurs’ decision to start a business in a male-dominated trade. One of the main findings of these studies was that women who choose to operate in a male-dominated trade - or crossover - typically do so with the help of husbands or other male family members who have existing connections in these trades. In partnership with United Nations Industrial Development Organization (UNIDO) and Selam David Roschli Technical and Vocational College, the GIL set out to study what motivates students to choose different streams of coursework at a technical and vocational education (TVET) institution and how their personal interest, expectations for future employment, and other factors influence this choice. The strongest predictor of a young woman’s decision to enroll in male-dominated technical and vocation courses is her existing relationships with people who work in the associated trade. When choosing coursework, personal preferences, and future work prospects are rated as more important than the preferences of family and friends. More work needs to be done to pilot and evaluate the impact of interventions that create early points of contact and exposure for young women to professions that are traditionally dominated by men.